universal pocket spring machine
Description of operation
The FPC-90 produces continuous strings of pocket springs.
The wire is fed from the swift and is wound to springs. After the coiling process, the springs are held by the 4 star-shaped conveying arms and heattreated between two electrodes. This heat treatment relaxes the springs that have become tense from the coiling process and reduces the setting loss. Subsequently, they are cooled in the cooling channel by means of an air ventilator and then conveyed to the spring setting station.
The springs are compressed and inserted into the folded band of fabric, which comes from the roller and has been horizontally folded over a forming shoulder. The ultrasonic welding units then create the pockets. The springs are then decompressed and set upright in the setup station. The resulting continuous strings of pocket springs leave the machine for further processing. Cutting as an option.
- Technical Data
|Type of springs||Barrel / Cylindrical|
|Spring dimensions||Outer waist diameter Ø (Dta) 40 - 75 mm|
|Spring height||after setting: 100 - 260 mm pocket height: 100 - 230 mm|
|Spring wire gauge||1.6 - 2.2 mm|
|Performance||up to 90 springs/minute (depending on spring dimension)|
|Air consumption||approx. 25 m3 / hour|
|Power consumption total||approx. 20 kVA|
|Power requirements||Voltage: 3 x 400 V, input fuse: 100 A or Voltage: 3 x 220 V, input fuse: 100 A (other Voltages on request) Frequency: 50/60 Hz|
|Working temperature||+10° C to +40° C|
|Weight||net approx. 3‘750 kg (Swift with safety mesh guard net approx. 580 kg)|
- Extensive working range
- Swift, 1‘000 kg (HS-412) is standard
- Heat treatment can be switched off
- Material seam on upper side of the spring (edge seam)