Pneumatic Bending System Fides
The bending machine MP-2V creates the frames for spring units in round wire or in flat steel strip, in an easy and fast way.
The machine is easily adaptable to any need and allows for fast and easy modifying of the frame size. By substituting the tools you can switch from round wire to flat steel strip. The machine is fed manually. When ordering the machine for flat wire, a swift is included. Using compressed air, the FIDES bending machine is very reliable. There are no wearing parts, with the exception of the cutter blades.
The optional table is made in tree parts to allow transport and handling. Any customer can build it by himself following the Fides instructions.
|Production||Up to 40 frames / hour (depending on the operators skills)|
|Round frame wire||Wire diameter 3.5 - 5.0 mm|
|Flat steel frame wire||Steel strip width 6 - 10 mm Steel strip thickness 1.4 - 1.8 mm|
|Minimal internal roll diameter||300 mm|
|Maximal external roll diameter||900 mm|
|Bending radius||approx. 40 mm|
|Compressed air pressure||6 bar|
|Compressed air consumption||10 m3 / hour|